When it comes to energy economy, LED parking lot lighting is among the most secure and environmentally beneficial solutions. There are a few factors to consider when selecting the proper fixture for your lighting installation, including the voltage and mount type. Here is a helpful shopping guide for LED lights to help you choose the correct one for your requirements.
Describe LED.
One of the most often asked questions about parking lot lighting is "What is LED?" Well, light-emitting diodes, or LEDs for short, are a particular kind of light source that generates light from a collection of LEDs. LEDs often utilize less power than outdated metal halide or high pressure sodium lamps when upgrading parking lot lighting using a one-to-one configuration, which results in extra electricity savings and qualifying for rebate programs!
What Are the Benefits of LED Parking Lot Lights?
There are various benefits to selecting LED parking lot lights, including the following:
As most LED parking lot light fixtures are rated for a lifetime of 50,000 hours, or around 5.7 years, as opposed to the typical metal halide bulb's lifespan of just 6000-15,000 hours, cost-effective LED fixtures don't need to be changed as often as HID lights.
Power Savings
Compared to HID parking lot lights, LEDs are up to 70% more efficient, and just 5% of the energy they generate is lost as heat. In contrast to metal halides, which gradually lose their brightness over time, this enables the lights to run longer while maintaining the same light output.
Safety
With regard to parking Traditional parking lot lights are becoming less effective over time, which increases nighttime safety issues. Parking lots with inadequate lighting might have high crime rates and car accidents. Due to their effectiveness and output, LED parking lot lights will keep your parking lot brighter for longer, preventing crime and ensuring the safety of your customers.
Alternatives to Take into Account When Buying LED Parking Lot Lights
The following are a few alternatives to think about while selecting LED lighting for parking lots:
How tall is the pole?
What form does the pole have? (Square or Round)
How is the pole constructed? (Wood, Fiberglass/Concrete, Aluminum)
What is the wattage of any existing fixtures that are installed on the pole, and how many fixtures are placed on each pole, if any?
What kind of mounting do you require? (HTM provides choices for both Adjustable Direct Mount and Adjustable Split-fit Mount)
If utilizing an adjustable split-fit mount, do you already have a 2-3/8" vertical tenon mounted?
What voltage is required by the fixture?
Will the fixtures need a photocell or dusk-to-dawn sensor?
